The galvanized wire needs to be cleaned before plating:
Compared with other galvanizing processes, the pre-plating cleaning requirements for the substrate during cyanide galvanizing are low. However, in the current trend of increasing the quality grade of cyanide galvanized layer, some pollutants are introduced into the plating tank. Obviously become harmful. Since cleaning the galvanized layer wastes a lot of time and reduces the yield, it is very important to properly clean the substrate and perform an effective rinsing operation before plating.we are galvanized wire suppliers.
Defects such as surface layer removal, surface inclusions, etc., which are widely removed from the exterior of the deposited layer, can be found and treated by conventional techniques; excess foam is formed by the incorporation of soap and saponifiable fatty surfactant into the bath. Moderate foam formation rates may be harmless. The large amount of tiny homogenous particles present in the bath stabilizes the foam layer, but the accumulation of excessive solid particles can cause an explosion. Use activated carbon to remove surface active substances. Or the foam is not stable by filtration, which is an effective measure; other measures should be taken to minimize the amount of surfactant introduced. The introduction of organic matter can significantly reduce the plating speed. Although the chemical formulation is advantageous for high deposition speeds, the thickness of the coating cannot be satisfied after the organic matter is taken, so that the activated carbon can be used to treat the bath.
Our company attaches great importance to contracts and keeps promises. Based on the tenet of quality first and customer supreme, we are willing to cooperate with the vast number of manufacturers to develop together and re-create brilliant in cutting-edge technology products. Here, all the staff of our factory express their heartfelt thanks to the users and colleagues from all walks of life who care and support the development of the factory!